UPSA Kit
The UPSA (Universal Pitot Static Adapter) is the perfect accessory to any avionics shop. This premier system was designed exclusively for performing pitot / static system tests to most any aircraft. The UPSA can be used with or without electrical power, in the hanger or out in the field, it has you covered, which makes the system more versatile than the competition. It comes standard in dual configuration, however can be used on dual or single static port configured aircraft. The fully articulating legs allow for flexible “Static” installations & the pure gum rubber ensures a tight “Pitot” seal every time. The UPSA will give you audible as well as visual warnings in the event of a power loss or of a low vacuum situation regardless of the power configuration you’re in. The USPA is the next generation of universal adapters.
- Accessories
- Documents
Adaptors
We can provide adapters for any type of aircraft, helicopter or UAV.
Please contact us with the details of your aircraft.
Hose-kit-2
For connecting Models 6150, 6200, 6300 (all models) to aircraft with relatively small airframes
Includes the following:
- 4 each, #4 Hoses, 20 ft. length with #4 AN-female fittings on each end
- 2 each, #3 Hoses, 2 ft. length with #3 AN-female fittings on each end
- 2 each, Reducer #4 AN-male to #3 AN-male
Hose-kit-C
For connecting Models 6150, 6200, 6300 (all models) to aircraft with relatively large airframes
Includes the following:
- 4 each, #4 Hoses, 30 ft. length with #4 AN-female fittings on each end
- 2 each, #3 Hoses, 2 ft. length with #3 AN-female fittings on each end
- 2 each, Reducer #4 AN-male to #3 AN-male
Hose-kit-3
For connecting Models 6600, 6600-M4H (without using OSM) to aircraft with “Smart Probes”
Includes the following:
- 6 each, #4 Hoses, 15 ft. length with #4 AN-female fittings on each end
- 6 each, #4 Hoses, 10 ft. length with #4 AN-female fittings on each end
- 6 each, #4 Hoses, 8 ft. length with #4 AN-female fittings on each end
- 8 each, #4 Hoses, 2 ft. length with #4 AN-female fittings on each end
- 4 each, #3 Hoses, 2 ft. length with #3 AN-female fittings on each end
- 4 each, Reducer #4 AN-male to #3 AN-male
- 10 each, #4 AN-male “Tee”
With so many hoses and “Tee”s, you can see why we strongly recommend using the OSM ! )
MOB (Multi Output Box)
UPSA (Universal Pitot Static Adapter)
The Laversab UPSA Kit is designed for cost conscious customers looking to get leverage across their aircraft fleet. The UPSA kit will interface reliably with most General Aviation aircraft. It comes with two Pitot and two Static adapters. Each Static adapter has articulating arms with suction cups that use a vacuum supply to firmly mount the adapter to the aircraft body. The UPSA kit can be used with either AC power (UPSA) or an optional battery (UPSA-B).