Commercial Aviation

Model 6300

The Model 6300 is an RVSM Pitot Static Tester targeted for all Commercial Aircraft. It is used to perform leak-checks and accuracy checks on the Pitot Static systems of RVSM aircraft. Accuracy checks are typically performed on altimeters, airspeed indicators and VSI’s. The Model 6300 is equipped with a Remote unit with large keypad and display, a removable 8-hour battery (optional), wide operating temperature (optional), and “profiles” to accelerate testing. Calibration is required only once a year. The 6300 can be controlled by an iPad or other tablets.


Model 6600-NG

The 6600-NG Automated Tester is ideal to test any commercial aircraft equipped with SmartProbes™, approved for Embraer EJETS and Bombardier C-Series among others. The tester has one Static output (Ps1), one Pitot output (Pt) and a third output (Ps2) which can be used to simulate either AOA or AOS. Using the small and light-weight Remote unit, a user can operate the tester from the cockpit and test the entire pitot and static system of the aircraft. The Model 6600-NG comes with an optional removable 8-hour battery, wide operating temperature (optional), and “profiles” to accelerate testing. Calibration is required only once a year. The 6600-NG is also WiFi-enabled, which enables wireless remote control using an iPad or other tablets.


Model-6300L-Automated-Pitot-Static-Tester

Model 6300L

NSN: 6625 01 358 6854

The Model 6300L is an RVSM Automated Pitot Static Tester targeted for all Commercial Aircraft. It is designed to connect directly to an aircraft’s Pitot and Static system. Using the small and light-weight Remote unit a user can operate the tester from the cockpit and use it to test the entire pitot and static system of the aircraft, including altimeters, VSIs, airspeed / Mach indicators, air data computers and auto-pilots. The tester includes built-in vacuum and pressure pumps and emergency manual bleed-down valves. The operator simply connects power, and the pitot and static hoses, to make the unit operational. It requires calibration only once a year. The use of “Profiles” makes it possible for the operator to run through a test using only a single key on the Remote unit.


Model 6600: Automated Pitot Static Tester with 3 Outputs

Model 6600

The 6600 Automated Tester is designed for use on aircraft with SmartProbes™ capable of measuring AOA using Air Data. The tester has one Static output (Ps1), one Pitot output (Pt) and a third output (Ps2) which can be used to simulate either AOA or AOS. Using the small and light-weight Remote unit a user can operate the tester from the cockpit and test the entire pitot and static system of the aircraft. The tester includes built-in vacuum and pressure pumps and emergency manual bleed-down valves. The high accuracy of this unit meets all RVSM requirements. Calibration is required only once a year.


Model 6270: RVSM Automated Pitot Static Tester

Model 6270

The Model 6270 is a Pitot Static tester designed for RVSM-compliant aircraft capable up to 650 knots. The Model 6270 is used to perform leak-checks and accuracy checks on the Pitot Static systems of RVSM aircraft. Accuracy checks are typically performed on altimeters, airspeed indicators and VSI’s. The Model 6270 is equipped with a Remote unit with large keypad and display, a removable 8-hour battery (optional), wide operating temperature (optional), and “profiles” to accelerate testing. Calibration is required only once a year. The 6270 is also WiFi-enabled, which enables wireless remote control using an iPad or other tablets.

preloader