Helicopters & General Aviation

Model 6200

The Model 6200 is a Pitot Static tester targeted for helicopters and Non-RVSM aircraft. It is approved for most Helicopters and is used to perform leak checks and accuracy checks on the Pitot Static systems. Accuracy check is performed on typical flight instrumentation – altimeters, airspeed indicators and VSI’s – and can be done at low airspeeds. The Model 6200 includes a Remote unit with large keypad and display, a removable 8-hour battery (optional), wide operating temperature (optional), and “profiles” to accelerate testing. The unit can be controlled by an iPad or other tablets.


Model 6150: Digital Air Data & Leak Tester

Model 6150

The 6150 Tester connects directly to an aircraft’s Pitot and Static system. It allows the user to simulate altitude, airspeed, and VSI and also to perform leak checks on both the Pitot and Static systems of an aircraft. The high accuracy of the digital transducers used in the tester makes it suitable for performing leak checks on any aircraft. The tester has built-in, high-capacity vacuum and pressure pumps that make it capable of handling leak-checks on any type of aircraft, including wide-body transport and cargo aircraft. Leak values are clearly displayed in 1, 3, and 5 minutes intervals. Several protection features are included in the tester to reduce the possibility of damage to the aircraft instruments. The solid-state transducers are immune to damage due to pressure surges. Calibration is required only once a year.


Model 6300

The Model 6300 is an RVSM Pitot Static Tester targeted for General Aviation. It is used to perform leak-checks and accuracy checks on the Pitot Static systems of RVSM aircraft. Accuracy checks are typically performed on altimeters, airspeed indicators and VSI’s. The Model 6300 is equipped with a Remote unit with large keypad and display, a removable 8-hour battery (optional), wide operating temperature (optional), and “profiles” to accelerate testing. Calibration is required only once a year. The 6300 can be controlled by an iPad or other tablets.


Model-6300L-Automated-Pitot-Static-Tester

Model 6300L

NSN: 6625 01 358 6854

The Model 6300L is an RVSM Automated Pitot Static Tester targeted for General Aviation. It is designed to connect directly to an aircraft’s Pitot and Static system. Using the small and light-weight Remote unit a user can operate the tester from the cockpit and use it to test the entire pitot and static system of the aircraft, including altimeters, climb indicators, airspeed / Mach indicators, air data computers, and auto-pilots. The tester includes built-in vacuum and pressure pumps and emergency manual bleed-down valves. The operator simply connects power, and the pitot and static hoses, to make the unit operational. It needs to be calibrated only once a year. The use of “Profiles” makes it possible for the operator to run through a test using only a single key on the Remote unit. Also, all commands can be performed through the RS232 interface.

preloader