-
Custom HazLoc Solutions
Through our experience in designing systems for rig environments, Laversab is uniquely qualified to build custom solution for hazardous locations. Previous solutions include Protocol Translators (OPC/Modbus/PROFINET/WITS0/ WITSML™️), Pit Volume Totalizer, Depth Trackers, Machine monitoring.
Through our process, our clients have the ability to customize all aspects of the solution, including certification (Zone 1, Zone 2, or non-certified), Input/Output requirements, Protocols, and system performance. All solutions come with Laversab’s world-class service and renowned support. When quality matters, use Laversab.
-
Depth Tracker: Option for 28XX
The Depth Tracker is a fully integrated electronics module that adds depth tracking capability to the Laversab 28xx Series rig-floor computers. The module includes all the necessary safety barriers that allow the user to place the encoder, hook load sensor and manual slip switch in ‘hazardous’ locations. A user-friendly Depth Tracker Software is included, which allows the user to configure and calibrate the depth tracker module. If an EDR or other data logger is not available, the Depth Tracker Software can also be used for logging all the depth tracker measurements for the entire job duration.
-
Depth Tracking Add-on
The Laversab Depth Tracking Add-on is a PCB that can be added to existing Laversab systems. It is capable of recording depth data while drilling and can interface with Zone 1 encoders and hook-load sensors. It includes easy-to-use software for sensor calibration, data recording, and advanced logging.
Depth data is formatted as WITS0 and/or WITSML. It can be stored locally or used by any external applications. If no EDR is available, the Depth Tracking add-on can act as the primary depth logger.
-
EDR Software: LINKS
Laversab LINKS is a rig-ready software package built for the Laversab EDR as well as 3rd party EDRs. It is responsible for acquiring surface parameters, formatting into WITS0 or WITSML, and transmitting or storing the data. LINKS calculates both time-based and depth-based measurements.
LINKS is responsible for making real-time surface parameters available to the driller, operator, and offsite stakeholders. Key Performance Indicators, Tour Sheets, and Daily Reports are also managed by the LINKS. LINKS also has modules for Lithology, Swab, Well Planning, and Ton-Mile calculations.
LINKS is available for daily rent as well as purchase. License access and entitlements can be managed online.
-
EDR System
The Laversab Electronic Drilling Recorder is designed for common data acquisition applications on the rig, including Mudlogging, Lithology, Pit Volume Totalizer (PVT), Depth Logging, and more. The EDR makes real-time surface parameters available to the driller, operator, and offsite stakeholders. Key Performance Indicators, Tour Sheets, and Daily Reports are generated by the LINKS EDR Software. The system works with typical surface measurement sensors, which can be reused across multiple jobs.
The Laversab EDR enables service companies to affordably add additional revenue streams by providing EDR services themselves. Multiple payment options are available for qualified customers.
-
Hazardous Location Computer: Zone-2 (Legacy)
Laversab Models 2804 / 2852 / 2860 are Zone-2 certified HazLoc workstations designed for rugged applications. These touchscreen units are built for use on the oil rig, on vehicle panels, or in safety-critical environments where extreme weather and shock/vibration conditions may exist. The units can be configured to meet any specific requirements. Multiple protocols and communication options – both wired and wireless – are available.
These units can also integrate PCBs designed by the customer or by Laversab for custom applications. Customer-specific software can be installed before or after delivery.
-
Hazardous Location Computer: Zone-2 Workstation Widescreen
Laversab Model 2874 Zone-2 HazLoc workstations have been refreshed with a modern design. Now with a smaller footprint and standard I/O ports, these rugged systems are ideal for applications on the oil rig, in vehicles, or in safety-critical environments. The units can be customized for specific requirements.
As before, These Laversab systems can integrate PCBs designed by the customer or by Laversab for custom applications. Customer-specific software can be installed before or after delivery.
-
Hazardous Location Computer: Zone-2 Workstations
Laversab Zone-2 HazLoc workstations (2854/2864) have been refreshed with a modern design. Now with a smaller footprint and standard I/O ports, these rugged systems are ideal for applications on the oil rig, in vehicles, or in safety-critical environments. The units can be customized for specific requirements.
As before, These Laversab systems can integrate PCBs designed by the customer or by Laversab for custom applications. Customer-specific software can be installed before or after delivery.
-
HazLoc Computer: Model 2800 (Legacy)
Laversab Model 2800 is a Class 1 Division 2 certified HazLoc workstation designed for legacy systems. This unit includes a 15” touchscreen and options for a 2.4GHz or 900MHz wireless radio.
Customer-specific software can be installed before or after delivery. However, Laversab recommends the Models 2804 / 2852 / 2860 for new requirements.
-
LINKS Collector
For customers who require their data to be in WITSML™ format, the Laversab LINKS Collector can convert their drilling data to WITSML™. Versions 1.3.1 & 1.4.1 are currently supported.
The LINKS Collector can handle most data formats – from WITS0 to proprietary formats used by equipment companies. LINKS Collector is a low footprint software that can run on any rig system.
-
Model 2804: Class 1Div 2 Rig Floor Computer 10.4″
The 28xx-Series Zone 2 Touchscreen Computers are designed for rugged applications, including Measurement While Drilling, Electronic Drilling Recording, Depth Tracking, and all types of vehicle mounted applications. The series is available in 10.4”, 15”, and 19” sunlight readable displays. Each unit has room for customer-specific data acquisition boards to be installed and possibly certified for Zone 2 use. An innovative thermal design guarantees adequate cooling and reliable operation in all conditions including -40°C to +60°C temperatures, even when equipped with a high performance i7 CPU for the most demanding applications. Multiple I/O and wireless connectivity come standard. This Series is ideal for high performance computing in extreme environments.
-
Model 2850: Rig-Floor Computer (Class 1 Div 2)
The 28xx-Series Zone 2 Touchscreen Computers are designed for rugged applications, including Measurement While Drilling, Electronic Drilling Recording, Depth Tracking, and all types of vehicle mounted applications. The series is available in 10.4”, 15”, and 19” sunlight readable displays. Each unit has room for customer-specific data acquisition boards to be installed and possibly certified for Zone 2 use. An innovative thermal design guarantees adequate cooling and reliable operation in all conditions including -40°C to +60°C temperatures, even when equipped with a high performance i7 CPU for the most demanding applications. Multiple I/O and wireless connectivity come standard. This Series is ideal for high performance computing in extreme environments.
- Home
- About
Products
Avionics Radio Test Sets
Air Data Test Sets
- Product Selector
- Quote Request
- Customer Support
- Contact
