Gamma Logging
Resistivity Logging
Relogging functionality
1x Hook load [Ex ib]
1x Manual Slips [Ex ib]
1x 4-20mA channel [Ex ib]
Depth tracking software application for Laversab Depth Tracking board
Target Application: Land rigs, Offshore rigs, Work-over rigs
Description: Laversab LINKS DT is a depth tracking software application used to control the Laversab Depth Tracking board, which can be added to any Laversab RFD. LINKS DT is used to configure and calibrate depth sensors – including encoder, hookload, and slips – to get basic depth parameters while drilling. This is especially useful when an EDR is not available to service companies.
Depth data is formatted as WITS0 and/or WITSML™️. It can be stored locally or used by any external applications. LINKS DT can operate as either as the main application or in the background passing data to another drilling application.
Test Set Type | Air Data Ramp |
---|---|
Aircraft Type | Business Jet, Commercial, Helicopter, GA, & Non-RVSM |
RVSM Capable | Yes |
Max Aircraft Altitude | 50,000 ft, 60,000 ft |
Max Aircraft Airspeed | 500 knots, 600 knots, 650 knots, 690 knots |
Number of Channels | 2 |
Target Application | Business Jet & Commercial |
Range | -2,000 to 60,000 ft |
Resolution | 1 foot |
Accuracy | 2 ft. @ 0 ft. 3 ft. @ 10,000 ft. 4 ft. @ 20,000 ft. 6 ft. @ 35,000 ft. 12 ft. @ 50,000 ft. |
Rate | 0 to 500 knots/min |
Remote controller | Standard |
Wi-Fi | Standard, Yes |
RS-232 interface | Standard |
IEEE-488 interface | Not Available |
Encoder input | Optional |
28 VDC Power | Not Available |
Battery | Optional, Yes |
Heaters | Optional |
Warranty | 3 Years |
Displayed Static Units | feet, meters, inHg, mbar, psi, mmHg, kg/cm2 |
Displayed Pitot Units | knots, Mach, kmph, mph, inHg, mbar, psi, mmHg, kg/cm2, EPR |
Power Requirement | 90-260 VAC, 47-400 Hz, 100 W (200W with Heaters) |
Dimensions & Weights | 22" x 14" x 9" / 34 lbs. |
Calibration Interval | Annual |
Operating Temp. | 0°C to 50°C |
Optional Temp Ranges | -40° C to 50°C |
Humidity (non-condensing) | 5 to 100% |
Altitude capability (ft) | 50,000 ft, 60,000 ft |
Airspeed capability (knots) | 500 knots, 690 knots |
Wide Temp capable | Yes |
Battery/Wi-Fi capable | Yes |
Capability | Battery/Wi-Fi, RVSM Capable, Wide Temp |
Range socf | 0 to 15,000 ft./min |
Accuracy socf | 1% of Rate |
Resolution socf | 1 ft./min |
Range poaf | 0 to 690 knots |
Rate poaf | 0 to 500 knots/min |
Resolution poaf | 0.1 knot |
Accuracy poaf | 0.04 knots @ 500 knots, 0.1 knots @ 200 knots, 0.2 knots @ 100 knots, 0.3 knots @ 50 knots, 1.0 knots @ 20 knots |
comparison_order | 2 |
WITSMLTMdata analyzer with dashboard visualization for RTOCs.
Target Application: Real-time Operating Center, Remote monitoring
Description: Wellnode is a dashboard-based visualization and analysis application built to monitor one or multiple wells in real-time. It supports WITSMLTMand ETPTM data coming from any source – EDR, Mudlogging unit, Directional Drilling, Managed Pressure Drilling, Logging while Drilling, among other. Users can create dynamic dashboards in a Real-time Operating Center (RTOC) to closely manage their wells, gain insights, and create reports.
Capabilities include:
Data acquisition system for drilling rigs. Real-time surface paramaters.
Target Application: Work-over rigs, Land rigs, Offshore drilling rigs
Description: The Laversab EDR is a data acquisition system with purpose-built software to monitor surface parameters in real-time. It designed for multiple applications on the drilling rig, including Depth Logging, Mudlogging, Lithology, Pit Volume Totalizer (PVT), and more.
The EDR makes real-time surface parameters available to the driller, operator, and offsite stakeholders. Key Performance Indicators, Tour Sheets, and Daily Reports are generated by the LINKS EDR Software. The system works with typical surface measurement sensors, which can be reused across multiple jobs.
Customers can select the number of channels, junction boxes (JBs), sensors, and cables they require for each system. Rigs with existing sensors and hardware can be updated to use the Laversab EDR. This system is highly portable and can be relocated after a job is completed.
Zone-2 RFD with 15″ display & rich I/O options
Target Application: MWD Surface Systems, Rig Floor Displays, HazLoc Computers, Truck-mounted HMI
Description: The Model 2854 is a Zone-2 workstation ideal for applications on the oil rig, in vehicles, or in safety-critical environments. This 15″ RFD features standard I/O ports to interface easily with other systems. The unit is configurable – certification-level, performance, optional digitizer, and optional depth tracker. The Model 2854 is designed to interface with sensors and communicate with other systems.
MWD manufacturers have largely standardized on Laversab Zone-2 RFDs.
No products in the compare list