Welcome to your Laversab Quiz
There are 25 questions, you have to answer at least 19 questions correctly in order to receive a passing score of 75%.
Once you begin the test you will not be able to leave and return to the questions you left. You will have it retake the entire test. If you fail the test you will be able to try again until the course expires.
The questions must be answered in order. When you are done answering a question, click the next button to continue. You will not be able to return to the previous questions once you have clicked the next button.
Good luck!
Full Name
Email
1.
The Pitot/Static system supplies pressure measurements to the flight instruments?
2.
The altimeter measures pitot pressure to indicate level flight.
3.
The test set and hoses placed on the floor cause a reverse flow simulating a small leak which will give you inaccurate test results.
4.
When testing is complete and before you disconnect the test set, hoses and adapters from aircraft, or disconnect the test unit from the power supply, the pressures in the system must be returned to local atmospheric pressure (ground) with zero airspeed.
5.
Prior to using the test set, it is NOT important that you familiarize yourself with the test set and aircraft manufacturer’s maintenance manual.
6.
The Laversab 6300 display units of measure in metric units only.
7.
During flight as the aircraft climbs, static pressure decreases, and the vertical speed indicator moves up?
8.
Which image shows the correct area on the Laversab 6300 that matches the text below the test set.
